Optical
Ensure that your audio source is connected via an Optical (S/PDif) cable to the rear of the active speaker, and is switched on.
Select the Optical input either with the remote control or by short pressing the Volume / Input knob to the rear of the product.
Auxiliary
Ensure that your audio source is connected via a stereo RCA lead to the rear of the active speaker, and is switched on and
playing music.
Select the Auxiliary input either with the remote control or by short pressing the Volume / Input knob to the rear of the
product. You should now hear your music playing.
Controlling the volume for Auxiliary source music
There are volume controls available to adjust how loud your music is playing back – on the audio source itself, and on the
speaker. You will not be able to get maximum volume unless the volume is turned up to maximum both on the audio source,
and the speaker.
For optimum sound quality we suggest turning the volume to near maximum on your audio source, and then using the vol-
ume control on your speaker (rear knob or remote control) to adjust the volume output to your desired listening level.
To Next Page
Loading...