185, 195, 205, & 225 • Owner’s Manual
Supplement
Chapter 7: Deck Equipment
61
Bow Cover (If Equipped)
1. Snap the two forward snaps (A) to the deck.
2. Snap the bow cover to the entire port side.
3. On the starboard side, only snap the for-
ward half of the bow cover to the deck.
4. Insert the adjustable, center support
pole (B) into both the bow cover and
the table base (C).
5. Adjust the support pole so that it is just
high enough to stay inserted in the
bow cover.
6. Snap the rest of the bow cover to
the deck.
7. Adjust the support pole to take any
slack out of the bow cover.
A
B
C
To Next Page
Loading...
