INSTALLATION
UNPACKING
Compare the unit and serial number of the equipment you received to the
packing slip located on the outside of the box. Log this information on the
sheet on page 61. Inspect equipment carefully for damage that may have
occurred in shipment. If there is damage to the equipment or if materials
are missing, contact BayTech customer service at 228-467-8231 or call
toll free inside the United States at 800-523-2702. At a minimum, you
should receive the following:
a. The DS-Series Unit
b. This manual with any applicable addendum(s).
c. 1 ea 9FMJ45PC4 adapter
d. 1 ea MJ08X007(MJ45) cable
e. 1 ea #AA1580-5 (XFO028 ) 15 VAC transformer
f. 1 ea RJ-11 telco cable -- RJ04X007 (DS71-MD2 only).
g. 1 ea 25MMJ45MD-6 adapter (DS71 only)
NOTE: Keep the shipping container and packing material in the
event future shipment is required.
PREPARING THE INSTALLATION SITE
The installation area should be clean and free of extreme temperatures and
humidity. Allow sufficient space behind the unit for cabling.
To Next Page
Loading...
Need help?
General
