Need help?Do you have a question about the BayTech DS6 and is the answer not in the manual?
Describes connecting the DS-Series to a computer via EIA-232 serial port.
Covers basic operational steps, including accessing the main menu.
Details how to access the main operational menu on the DS71.
Explains methods to select and access connected devices through the menu or ASCII commands.
Guides users on how to access the module configuration interface.
Instructions for unpacking the DS-Series unit and checking contents.
Advice on selecting a suitable environment for installing the DS-Series unit.
Safety precautions and instructions related to powering the DS-Series unit.
Details about MJ-45 cables and necessary adapters for connections.
Instructions for connecting modems to the DS71-MD2 Host Module via RJ-11 ports.
Specific steps for establishing an EIA-232 serial connection to the DS71 or DS71-MD2.
Instructions for connecting an internal modem on the DS71-MD2 for remote access.
Steps for connecting an external modem using adapters and cables to the DS71 or DS71-MD2.
Guide for connecting the DS73TP module to a network hub using a 10Base-T cable.
Covers operational aspects, including accessing menus and selecting devices.
Details on how to access the main operating menu for the DS71 and DS71-MD2.
Explains methods to select and connect to specific devices or modules.
Describes binary mode for reliable data transmission and its activation/termination.
Steps for establishing a PPP dial-up connection using Windows 95 Dial-Up Networking.
Procedures for configuring the DS71 and DS71-MD2 host modules.
How to view the status of user-programmable features on the DS71/DS71-MD2.
Guide to configuring serial port parameters for the DS71 and DS71-MD2.
Detailed serial port configuration steps specifically for the DS71 module.
Detailed serial port configuration steps for the DS71-MD2 module.
How to set a unique name for each port on the DS71 or DS71-MD2 module.
Instructions for configuring the ASCII character string used to select I/O ports.
How to set the character used to invoke the main menu.
Configuration of the feature that prevents unwanted port disconnections.
Setting up the feature to identify module and port numbers upon connection.
Configuration of login response, including header, menu, password, and auto-connect.
How to enable or disable the header displayed upon login.
Procedures for changing or enabling/disabling the login password.
Instructions for enabling or disabling the main menu upon login.
Configuration for automatically connecting to a designated I/O port.
Configuration for DCD logon/logoff to prevent unwanted modem connections.
Configuration options for the internal modem on the DS71-MD2.
Setting the number of rings before the modem auto-answers.
Configuring Xon/Xoff handshaking for modem-to-modem communication.
Setting the inactivity period before the modem automatically disconnects.
Defining the character used to interpret commands instead of data.
Setting a unique identifier for the DS-Series module.
Procedure to reset power to all I/O ports on peripheral modules.
Procedures for configuring the DS74 Peripheral I/O Module.
Steps to configure serial port parameters for the DS74 module.
How to set a unique name for each port on the DS74 module.
Procedures for configuring the DS73TP Network Module for network access.
Setting the IP address for the DS73TP module to access the network.
Configuring the IP address for network access to the DS73TP.
Setting the subnet mask for the DS73TP module to identify network portions.
Configuring the gateway address for router connection on the DS73TP.
Setting the primary DNS server address for the DS73TP module.
Setting the secondary DNS server address for the DS73TP module.
Setting the primary Net BIOS Name Server address for the DS73TP.
Setting the secondary Net BIOS Name Server address for the DS73TP.
Setting the user name required for network connection to the DS73TP.
Setting the password required for network connection and configuration.
Setting a unique name for the DS73TP module for identification.
Fields for recording DS-Series unit model, serial numbers, and connected equipment details.
Diagram showing the mechanical layout of the DS71 module.
Diagram illustrating the mechanical layout of the DS71-MD2 module.
Diagram showing the mechanical layout of the DS74 module.
Diagram showing the mechanical layout of the DS73 module.
Diagram showing the faceplate layout of the DS71 module.
Diagram showing the faceplate layout of the DS71-MD2 module.
Diagram showing the faceplate layout of the DS73TP module.
Diagram showing the faceplate layout of the DS74 module.
To Next Page
General