Select #2, “Modem to Modem Xon/Xoff,”
from the Local Modem Setup menu,
followed by <cr>. The DS71-MD2 displays
the current Xon/Xoff status and asks if you
want to enable:
Modem to Modem Xon/Xoff Flow Control is
.....Disabled
Enable? (Y/N, CR for no change):
Type “Y” for yes followed by <cr> if you
want to enable Xon/Xoff. Type “N“ for no
followed by <cr> if you want to disable
Xon/Xoff. Type <cr> for no change. The
DS71-MD2 stores the change in non-volatile
memory and returns to the Local Modem
Setup menu.
Connectivity Configure the amount of connectivity (5 to
Timeout 255 minutes) before the modem
automatically disconnects. Entering a time
of 0 disables Connectivity Timeout. The
timer starts when the modem answers (DCD
high). The modem will disconnect,
regardless of activity, when time runs out.
Default Connectivity Timeout is 60
minutes.
Select #3, “Connectivity Timeout,” from the
Local Modem Setup menu, followed by
<cr>. The DS71-MD2 displays the current
setting and asks if you want to change:
Modem Connectivity Time-out is ....... 60 minutes
Change It? (Y/N) :
Type “Y“ for yes followed by <cr>. The
DS71-MD2 responds:
Enter Connectivity Time-out (5 to 255, 0 = Disabled)
or press ENTER for no change......... :
To Next Page
Loading...