If you fail to enter the Secondary NBNS
address in dotted decimal form, the DS73TP
responds again:
Enter Secondary NBNS address in dotted decimal
form:
The DS73TP responds indefinitely with the
same request until the Secondary NBNS
address is entered in the correct form.
User Name The User Name is required when
establishing a connection to the network.
From the configuration menu, Select #9,
“User Name,” followed by <cr>. The
DS73TP module responds with the current
user name and asks if you want to change.
Default User Name is user1:
Current User Name: user1
Enter User Name (8 chars. max.):
If desired, enter a new user name (8 chars.
max.). The DS73TP stores the change in
non-volatile memory and resumes the
configuration menu.
NOTE: User Name is Case Sensitive.
Password If enabled, password entry is required when
establishing a connection to the network and
before making DS73TP configurations.
From the configuration menu, Select #10,
“Password,” followed by <cr>. The
DS73TP module responds with the current
password and asks if you want to change.
Default Password is BTA:
Current Password: BTA
Enter Password (8 chars. max.):
To Next Page
Loading...