PPP DIAL-UP Using Windows 95Dial-Up Networking
CONNECTION or another dial-up networking program with
PPP, dial the modem connected to the host
module. The Host Module sends the main
menu:
Data Switch Series - F.0.10
Bay Technical Associates
Unit ID: DS73TP
Port Select Code: $BT
Attention Character: ;
Device A (2,1)...............1
Device B (2,2)...............2
Device C (2,3)...............3
Device D (2,4)...............4
DS73 (3,1)....…........5
Configure.................................C
I/O Modules Reset..................RM
Unit Reset................................RU
Exit...........................................X
Logout......................................T
Enter Request:
From the host module main menu, select the
DS73TP module connected to the network
or exit from the main menu and send the
ASCII character string to select the DS73TP
module. The DS73TP sends the following
header and prompts for user name.
NOTE: User name and password are case sensitive.
DS73TP Ethernet Module
F.0.01 Copyright (c) 1997
Bay Technical Associates
Enter User Name:
Enter User Name. (Default User Name is
user1.) The DS73TP responds:
Enter Password:
Enter Password. (Default Password is