BayTech DS6 User Manual

DS-SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
47
To change the escape character, enter the
decimal value of the Hex character to be
used as an escape character. The DS71-
MD2 displays the new escape character and
asks if you want to change. If there are no
further changes type <cr>. The DS71-MD2
stores changes in non-volatile memory and
returns to the Local Modem Setup menu.
UNIT ID The unit ID (64 chars. max.) appears in the
DS series module Main Menu and uniquely
identifies the unit. Default Unit ID is DS71-
MD2.
Select U, “Unit ID,” from the configuration
menu, followed by <cr>. The DS71 or
DS71-MD2 module displays the current
Unit ID and asks if you want to change:
Unit ID is ................................. DS71-MD2
Change It? (Y/N Change) :
Type “Y“ for yes followed by <cr>. The
DS71 or DS71-MD2 module responds:
Enter Unit ID (64 chars. max.) :
Enter the desired Unit ID, followed by <cr.>
The DS71 or DS71- MD2 module stores the
changes in non-volatile memory and returns
to the configuration menu.
I/O MODULES RESET From the main menu, type “RM” to select
“I/O Modules Reset,” followed by <cr>.
The DS71 or DS71-MD2 module recycles
power to all I/O ports on all peripheral
modules and responds:

BayTech DS6 Specifications

General

Brand	BayTech
Model	DS6
Category	Switch
Language	English