BayTech DS6 User Manual

DS-SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
36
Type “Y” for yes or “N” for no followed by
<cr> to toggle the existing status or type <cr>
for no change. The DS71 or DS71-MD2
module stores the Disconnect Time Guard
selection in non-volatile memory and returns
to the configuration menu.
CONNECT PORT When enabled, Connect Port ID Echo
ID ECHO identifies the module number and port
number you are connected to. Choose the
port device name or the module and port
number to echo when a DS71 or DS71-MD2
module selects a port on a DS74 module.
Default Connect Port ID Echo is disabled.
From the configuration menu, select #7,
“Connect Port ID Echo,” followed by <cr>.
The DS71 or DS71-MD2 module presents the
current status of Port ID Echo and asks if you
want to change:
Port ID Echo is....................Disabled
Change It? (Y/N):
Type “Y” for yes followed by <cr> to toggle
Connect Port ID Echo or “N” for no followed
by <cr>. If you answer yes, the DS71 or
DS71-MD2 module responds:
Disable Port ID Echo…................ 1
Use Module, Port number..….......2
Use Device Name.........…...............3
Exit..........................................…... X,CR
Enter Request:

BayTech DS6 Specifications

General

Brand	BayTech
Model	DS6
Category	Switch
Language	English