bbluv Ora - Sound and Unit Settings; Control Orä Sound; Memory Management; Save and Retrieve Readings

8
EN
Orä
CONTROL THE ORÄ SOUND
To mute: Turn on the thermometer
B
and immediately press and hold 3 seconds
on the sound button
G
. The mute symbol will appear on the screen .
To unmute: Turn on the thermometer
B
and immediately press and hold 3
seconds on the sound button
G
. The Öra will beep once and the mute symbol will
disappear from the screen.
SWITCHING FROM METRIC READING (°F/°C)
Turn on the thermometer
B
and switch the metric unit by moving the " °C/°F "
button mode
E
up and down. The symbol will change on the screen.
SAVE A READING
1. Measure the temperature wanted.
2. Press once on the Memory button
G
to 01. If the sound is on, a beep
will sound to conrm save.
3. Keep saving on the rst, all previously saved data will be pushed
back, meaning 01 will become 02, 02 will become 03, etc…
NOTE: The memory function is only available with forehead and ear mode. The thermometer will not save readings
made with the object mode.
RETRIEVE READINGS
1. Turn on the Orä
B
and press the Memory button
G
. " 01 " will
appear on your screen for the most recently saved reading.
After 2 seconds, the latest saved reading will appear.
2. To view older readings, press on the memory button again.
3. When the maximum number of records is exceeded, the oldest
memory data will be overwritten.
NOTE: The readings are saved from most recent to oldest, being 01 the most recent saved reading.
CLEAR MEMORY
To clear all the memory data, Turn on the thermometer
B
, slide open
the battery cover
I
and disconnect one of the batteries without removing it
completely. The Öra will ring a long beep. Reconnect the battery and close the
cover. The screen will turn red, which indicates the memory is rest.