EasyManua.ls Logo

BBQ GSF2818K - Grill Operation and Gas Connection; Connecting and Disconnecting Propane Cylinder

BBQ GSF2818K
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GSF2818K
Owner’s Manual
14
Operating Your Grill
CAUTION:
Use only the regulator provided. If a
replacement is necessary, call our customer service center. The
use of
unauthorized parts
can create an
unsafe condition and environment.
The propane gas supply cylinder used
must be
constructed
and
marked in accordance
with the
Specifications
for Propane
Gas Cylinders of the U.S. Department of Transportation (DOT). Only cylinders
with a listed overfill
prevention device (OPD)
and marked
“propane”
may be
used. Cylinders with an
OPD
will have
valve handles with three
“lobes” (prongs).
Use only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement
pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer.
Use
only
20-pound cylinders equipped with a
cylinder
connection device compatible with the connection for outdoor
cooking
appliances.
The
cylinder must include
a
collar to
protect the
cylinder valve.
Do not drop or handle the cylinder roughly.
If the
appliance is
not in use,
disconnect the cylinder.
Storage
of
the appliance indoors is permissible ONLY if the cylinder is disconnected
and removed from the appliance.
Store
cylinder
outdoors and out of the reach of children.
Do not store the cylinder
in a building, garage or other enclosed areas.
Never store your cylinder
where temperatures can reach over 125
.
Before connecting, make sure there is no
debris caught in
the head
of the
gas cylinder, regulator
valve
or in
the head of the
burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the regulator
valve when the
grill is not in use. DO NOT obstruct the flow
of combustion air or ventilation air to the grill.
Arrange the propane
cylinder
for vapor
withdrawal and equipped
with a listed overfill prevention device (OPD).
DANGER:
A fire causing death or serious injury may occur if the following is not followed exactly:
Never store or use gasoline or other volatile substances in the vicinity of this grill
.
Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another
potential heat source.
Never fill the propane cylinder beyond 80% full.
This grill is designed to connect to a standard 20 lb L.P. cylinder only, please refer to the Step 13 of assembly instructions for the
installation.
WARNING:
Don’t store spare gas cylinder in or near grill.
Connecting & Disconnecting The Gas Cylinder
LP (Propane) Gas Supply Connection & Disconnecting
1.
Always place the propane cylinder on the tank holder under the cart.
2.
Always confirm that all burner control knobs are in the OFF position before activating the gas supply.
3.
Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of
the regulator valve, or in the head of the burner and burner ports.
4.
Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the connection collar
by turning it clockwise with one hand while holding the regulator with the other hand.
(See diagram to right.)
5.
Disconnect the propane cylinder from the regulator valve when the grill is not in use.
6.
Always confirm that all burner control knobs are in the OFF position before disconnecting the gas supply.
7.
Before disconnection, be sure that the tank valve is in OFF position.
8.
Always disconnect the gas supply regulators as followings:
Loosen the connection collar by turning it anti-clockwise with one hand while holding the regulator with the other hand and
take the nipple of the valve out of the tank valve. (See diagram to right)
Do not obstruct the flow of combustion air and ventilation air to the grill.
Keep ventilation openings of the cylinder enclosure free and clear from debris.
9.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on cylinder valve
outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

Related product manuals