SETTING UP THE APPLIANCE
• Remove all packaging and accessories. Inspect appliance to make sure that it is in good condition.
• Place appliance on a stable and level surface near a window and wall outlet.
• Make sure there is at least 20 inches of clearance from the wall and on all sides.
• Keep unit at least 40 inches away from TV and radios to avoid electromagnetic interference.
• Do not place outdoors or in a damp environment.
• Do not operate in the immediate vicinity of water, such as near a bathtub, washbowl, bathroom, or
swimming pool.
• Keep appliance away from direct sunlight and other heat sources (stove, heater, etc.).
PARTS
HARDWARE
A
1 PC
EXHAUST HOSE
E
1 PC
REMOTE
B
1 PC
HOSE ADAPTOR
C
1 PC
VENTING ADAPTOR
D
1 SET
WINDOW VENTING
KIT
1
6 PCS
M4 x 10mm SCREW
2
6 PCS
M4 x 8mm SCREW
TOOLS REQUIRED
APPROXIMATELY
15 MIN.
ASSEMBLY
2 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
2 AAA BATTERIES
+
AAA
-
| 5
To Next Page