BCB 14000 BTU User Manual (English)

Questions and Answers:

A
Aaron BakerJul 27, 2025
Why is my BCB 14000 BTU Air Conditioner not cool enough?
- C
  Cole BellJul 28, 2025
  Several factors can cause your BCB Air Conditioner to not cool sufficiently. Check if doors or windows are open and close them. Remove any heat sources from the room. Ensure the unit is not in direct sunlight, and that the exhaust hose is correctly attached and not blocked. Also, the temperature might be set too high, so adjust it accordingly. A blocked air inlet or dirty filters can also impact cooling performance, so clean the air inlet and filters.
D
dawsoncarlosAug 6, 2025
What to do if my BCB 14000 BTU does not turn on?
- A
  Ariana WhiteAug 6, 2025
  If your BCB Air Conditioner isn't turning on, there are a few things you can check. First, the overheat feature may be activated; allow the unit to cool for 3 minutes and try again. Ensure the unit is properly plugged in and that the water tank isn't full, indicated by the water full indicator being on (drain the water tank if it is). If the room temperature is lower than the set temperature in cooling mode, adjust the temperature setting. Also, try replacing the remote batteries, as a low battery can prevent the unit from turning on.
B
burchshawnAug 16, 2025
How to fix a BCB 14000 BTU Air Conditioner remote that is not working?
- J
  Jason TurnerAug 16, 2025
  If your BCB Air Conditioner remote isn't working, try these steps: First, make sure you are close enough to the unit and pointing the remote directly at it. If that doesn't work, replace the remote's battery.