EasyManua.ls Logo

BCS 630 - Engine Starting Procedure

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BCS Crusader Power Scythes
CPS/MAX/0617 Page 11
Starting the Engine
Check the engine oil level. Top up with 10w/40 oil if necessary.
Check fuel level. Only use unleaded petrol from a clean container.
Never re-fuel when the engine is hot or running.
Leave 1” air space in the fuel tank.
Depress the red Engine Stop (OPC) Lever then pull up the Clutch Lever and secure with the
Locking Clip.
Ensure the Wheel Speed Lever is in neutral ‘O’ position.
Set the Throttle Lever to half.
Turn the fuel tap on the engine to ‘ON’ position, if the engine is cold set the choke lever to ‘ON’
position.
Pull the recoil start handle gently until it engages then give it a good strong pull to start the
engine.
When the engine has started, release the choke lever after a few seconds and return the
Throttle Lever to idle position.

Related product manuals