Page 20 CPS/MAX/0617
Spare Parts
When ordering spare parts please ensure you provide the
complete part number as listed in the spare parts diagrams
which can be found at www.tracmaster.co.uk/spare-parts
If you need to order replacement blades then it is important
that you quote the number that is engraved on the top
ofeachtooth(gure33)andifnecessary thenumberof
blades on your complete top bar.
The serial number of the implement should also be quoted,
this can be found on a label on the underside of the blue
cowling(Aingure34).
To order parts call our Parts Department on 01444 247689
or email spares@tracmaster.co.uk.
Figure 33
Figure 34
Number Imprinted on Blades:
Scythe Cutter Bar Serial Number:
Number of Blades on Top Bar: