Need help?Do you have a question about the BD 9002TIG03-G and is the answer not in the manual?
General| Brand | BD |
|---|---|
| Model | 9002TIG03-G |
| Category | Medical Equipment |
| Language | English |
Defines the pump's intended use and target users for controlling infusion rate and volume.
Specifies requirements for operating the pump, emphasizing trained medical staff competence.
Lists the approved applications for the pump, including fluid and medication infusions.
Lists therapies for which the pump is not indicated, such as enteral or epidural.
Provides guidance on how to use the manual and its contents.
Explains formatting, symbols, and terminology used throughout the document.
Describes the types of data sets (Guardrails vs. Non-Guardrails) and their elements.
Details the process of creating a master drug list and pump configurations.
Explains the process of approving, exporting, and uploading data sets to the pump.
Describes the function of each button on the pump interface (e.g., ON/OFF, RUN, HOLD).
Explains the meaning of visual indicators like AC Power and Battery status.
Explains various symbols found on the pump and their meanings.
Shows the display configuration when Volume To Be Infused (VTBI) is not set.
Shows the display configuration when Volume To Be Infused (VTBI) is set.
Explains the meaning of icons displayed on the pump screen.
Discusses the use of infusion sets and compatibility with various container types.
Details suitable operating environments and conditions for pump use.
Covers pump pressure settings and the various alarm conditions.
Addresses electromagnetic compatibility, interference, and grounding requirements.
Lists potential hazards and essential safety warnings for pump operation.
Covers checking the pump's completeness and connecting to the AC power supply.
Explains the default configuration settings provided with the pump.
Describes how to mount the pump using a pole clamp or docking station.
Details the function and operation of the pump's safety clamp device.
Step-by-step instructions for loading the infusion set into the pump.
Step-by-step guide on how to start an infusion after setup.
Configuring drug protocols, units, amounts, and safety limits.
Explains ml/h, Dosing Only, and Drugs selection modes.
Procedures for clearing volume infused and setting VTBI.
Explains the function and purpose of the KVO rate.
How to adjust pressure limits and prime the infusion set.
Administering boluses and configuring bolus delivery modes.
Describes the HANDSON and HANDSFREE bolus delivery options.
Adjusting the infusion rate during operation while the pump is infusing.
Managing rate lock and adjusting existing dosing or protocol infusions.
Reviewing dosing information and adding drugs during infusion.
Navigating through the various options within the infusion setup menu.
Configuring primary and secondary (piggyback) infusions.
Setting VTBI based on time and adjusting alarm volume.
Accessing event log, pump details, profile filter, and standby mode.
Procedures for replacing infusion sets and fluid containers.
Instructions for using the SmartSite™ Needle-Free Valve.
Step-by-step guide for configuring and starting a secondary infusion.
Visual guide illustrating the setup for typical secondary infusions.
Setting alarm tones and configuring general pump options.
Setting the pump's date, time, pump reference, and language.
Adjusting the pump's display backlight and contrast settings.
Overview of pump settings configurable via the Alaris Editor Software.
Details on configurable data set and general pump settings.
Specific configuration settings for large volume pump operations.
Parameters available for configuring the drug library.
Overview of the original alarm system and high-priority alarms.
Specific causes and recommended actions for high-priority alarms.
Describes medium and attention priority alarms and their indicators.
Explains visual and audio indicators for different alarm priorities.
Overview of the 3rd edition alarm system and high-priority alarms.
Specific causes and actions for 3rd edition high-priority alarms.
Describes medium and low priority alarms and their indicators.
Explains advisory messages related to exceeding Guardrails soft and hard limits.
Provides specifications and details for the Alaris Gateway Workstation.
Provides specifications and details for the Alaris DS Docking Station.
Steps for regular cleaning, inspection, and checks of the pump.
Information on battery charging, lifespan, and replacement recommendations.
Guidelines for cleaning the pump, door, flow sensor, and proper storage.
Guidelines for the proper disposal of electrical and electronic equipment.
Details on electrical safety, electromagnetic compatibility, and power supply.
Physical size, weight, and operating environmental conditions.
Details on battery type, charging time, and estimated battery life.
Information on data retention and a summary of alarm conditions.
Technical details for pump communication interfaces.
Details on rate accuracy, occlusion limits, and bolus parameters.
Specific features related to air detection, critical volume, and safety clamp.
Lists available spare parts and the Alaris Editor Software kit.
Records the history of document revisions and software versions.
To Next Page
