BD EleVation User Manual (English)

Other manuals for BD EleVation

Questions and Answers:

S
Sharon ByrdAug 10, 2025
What to do if the ERROR indicator blinks red and PRIME/PIERCE and SAMPLE buttons are solid red on my BD EleVation Medical Equipment?
- S
  Susan TurnerAug 10, 2025
  If the BD Medical Equipment's ERROR indicator blinks red, along with the PRIME/PIERCE and SAMPLE buttons showing solid red, it indicates an error during calibration, PRIME/PIERCE, or sampling. To resolve this, remove the BD EleVation™ Probe, place the BD EleVation™ Driver on a flat surface away from moving components, and press the SAMPLE button.
P
Paul WalkerAug 17, 2025
Why are the BATTERY and ERROR indicators blinking red with solid red PRIME/PIERCE and SAMPLE buttons on my BD Medical Equipment?
- L
  Lori WalkerAug 17, 2025
  If the BATTERY indicator and ERROR indicator are blinking red, and the PRIME/PIERCE and SAMPLE buttons are solid red on your BD Medical Equipment, it means the BD EleVation™ Driver was placed on the wireless charging stand while the BD EleVation™ Probe was loaded. Remove the BD EleVation™ Driver from the wireless charging stand and then remove the BD EleVation™ Probe to resolve this.
M
Mrs. Heidi WebsterAug 26, 2025
How to fix a solid red BATTERY indicator on BD EleVation Medical Equipment?
- J
  Jennifer HayesAug 26, 2025
  If the BATTERY indicator on your BD Medical Equipment is solid red, it indicates a low battery. To fix this, place the BD EleVation™ Driver on the wireless charging stand to charge the battery.
N
Nathaniel ReidSep 1, 2025
What to do if ERROR and SMART MODE indicators blink red with solid red PRIME/PIERCE and SAMPLE buttons on BD EleVation Medical Equipment?
- A
  amy75Sep 1, 2025
  When the ERROR and SMART MODE indicators blink red, and the PRIME/PIERCE and SAMPLE buttons are solid red on the BD Medical Equipment, it signifies that Smart Mode is overloaded. To fix this, remove the BD EleVation™ Probe, place the BD EleVation™ Driver on a flat surface away from moving components, and then press the SAMPLE button.