BDI cavo - Install Leg Assembly; Align Leg Assembly

2
assembly instructions
bdiusa.com
customerservice@bdiusa.com
cavo
8167
and
8168
Step 3
Install Leg Assembly
With Cabinet (C) resting safely on its back side, loosely install Leg
Assembly to cabinet bottom using Screw (D), Screw (G) and tighten with
Hex Driver (B).
Step 4
Align Leg Assembly
Double check that the outside face of the Legs (F) are flush with the side
of the interior cabinet, then tighten all screws down with with Hex Driver
(B). Do not overtighten.
D
D
D
D
D
D
D
D
B
G
G
G
C