Need help?Do you have a question about the BDI CORRIDOR 8179 and is the answer not in the manual?
General| Brand | BDI |
|---|---|
| Model | CORRIDOR 8179 |
| Weight | 211 lbs |
| Cable Management | Yes |
| Ventilation | Yes |
| Adjustable Shelves | Yes |
| Material | Powder Coated Steel |
| Color | Chocolate Stained Walnut |
| Dimensions | 28.25H x 79.25W x 20.25D in |
Assemble the base by attaching metal legs to the metal rail using screws and hex wrench.
Secure the assembled base to the bottom of the cabinet using screws and a hex wrench.
Attach door pulls to the cabinet doors using screws and adhere rubber bumpers.
Position the glass top flush with the cabinet front doors.
Install back panels into the upper and lower channels on the cabinet backside.
Reposition shelf pins using a screwdriver to adjust shelf height.
Use the open mouth wrench to adjust leg levelers for stable cabinet placement.
Adjust European hinges to correct door alignment and spacing.
Fine-tune door hinges with a Phillips screwdriver for proper spacing and movement.
Clean glass surfaces with household glass cleaner and a paper towel.
Clean satin-etched glass with glass cleaner; use Magic Eraser for scuffs.
Clean wood surfaces with a slightly damp cloth; avoid glass cleaner.
Clean these surfaces with a slightly damp cloth or non-abrasive cleanser.
Register your product to receive updates, service information, and helpful hints.
To Next Page
