1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor
®
Media furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with
a moist cloth.
Your Corridor
®
Media furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing
hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please
contact your BDI retailer.
For your convenience, wheel assembly is pre-installed. Wheels can
be removed if desired.
bdiusa.com
customerservice@bdiusa.com
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 05.09.2016 V10
CORRIDOR
®
8179
MEDIA CONSOLE
B1 Hex Wrench x 1
A Phillips Screwdriver x 1
C Cabinet x 1
D 1/4-20 x 10 mm
Machine Screw x 16
H M4 x 35 mm
Machine Screw x 8
I Door Pull x 4
K Glass Top x 1
Reinstall Leveler to Metal Leg E.
E
B2 Hex Wrench x 1
G 1/420 x 60 mm
Machine Screw x 6
E Metal Leg x 2
F Metal Rail x 2
Removal of wheels (optional):
Detach Wheel Assembly from
Metal Leg E by removing the
Leveler and Screw.
E
J Rubber Bumper x 8
N Back Panel x 2
L Adjustable Shelf x 2
M Adjustable Shelf x 1
To Next Page
Need help?
General
