BDI CASCADIA - User Manual

C - 1/4-20 x 12mm Screws
4mm Socket Drive
x 4
A - 4mm Hex Driver x 1
B - 5/16-18 x 50mm Screws
4mm Socket Drive
6201 x 8
6202 x 6
CASCADIA
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 201
6 BDI
6201 6202 Revision: 05-05-16
Component List
CASCADIA are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
6201 6202
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Placement and Maintenance
CASCADIA is designed for indoor use on level floors.
D - Table Assembly x 1
E - Left Leg x 1
F - Right Leg x 1
G - Horizontal Bar x 1
CASCADIA 6201 Desk
CASCADIA 6202 Console
B
C
G
D
E
F
C
B

Summary

BDI Cascadia Product Information

Placement and Maintenance Guidelines

Guidance on placing and maintaining the Cascadia furniture for indoor use on level floors.

Component Identification

Lists and identifies all components and hardware required for the assembly of Cascadia furniture.

Cascadia Assembly Steps

Step 1: Attach First Leg

Instruction to attach the first leg to the table assembly using specific screws and a hex driver.

Step 2: Attach Horizontal Bar

Instruction to insert and attach the horizontal bar to the leg using screws and a hex driver.

Step 3: Attach Second Leg and Bar

Instruction to attach the second leg and the horizontal bar to the table assembly.

Step 4: Adjust Levelers

Guidance on turning the furniture onto its legs and adjusting the levelers for stability.

Step 5: Change Drawer Positions (Optional)

Optional steps for the 6201 model: removing drawers and screws from slide blocks.

Step 6: Reassemble Drawer Slides (Optional)

Optional steps for the 6201 model: moving slide blocks and reattaching them to the table assembly.

BDI CASCADIA Specifications

General

Brand	BDI
Model	CASCADIA
Category	Indoor Furnishing
Language	English