1
B1 - Hex Wrench
x 1
B2 - Hex Wrench
x 1
corridor
8177 a nd 8179
Corridor is engineered for easy assembly.
Carefully follow this procedure to prevent any
damage.
Placement and Maintenance
Corridor is designed for indoor use on level floors.
Clean wood veneer with a moist cloth. Clean
glass with glass cleaner.
NOTE: This instruction sheet is intended for the Corridor collection;
model 8179 is shown for illustration.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
For your convenience, wheel assembly is pre-installed. Wheels can
be removed if desired.
Component List
Designed by Matthew Weatherly.
These distinctive product congurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2013, BDI
Made in China. 8177_8179REV120613v1
a s s e m b l y i n s t r u c t i o n s
bdiusa.com customerservice@bdiusa.com
C - Cabinet
x 1
G - 1/4-20 x 60 mm
Machine Screw
x 6
H - M4 x 35 mm
Machine Screw
8177 x 6
8179 x 8
F - Metal Rail
x 2
E - Metal Leg
x 2
D - 1/4-20 x 10 mm
Machine Screw
x 16
I - Door Pull
8177 x 3
8179 x 4
A - Phillips Screwdriver
x 1
M - Back Panel
x 2
L - Adjustable Shelf
x 2
K - Glass Top
x 1
J - Rubber Bumper
x 8
Removal of wheels:
Detach Wheel Assembly from
Metal Leg (E) by removing the
Leveler and Screw.
Reinstall Leveler to Metal Leg
(E).
E
E
To Next Page
Need help?
General
