EasyManua.ls Logo

BE B389HA - Shutting Down the Machine; Shutdown Procedure

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT
You must flush the detergent siphoning system after each use by placing the filter into a bucket of
clean water, then run the pressure washer in low pressure for 1-2 minutes.
Contact with chemicals can cause bodily injury and/or property damage.
NEVER use caustic liquid with the pressure washer.
Use ONLY pressure washer safe detergent/soaps.
Follow all of the manufacturer’s instructions.
9. SHUTTING DOWN YOUR MACHINE
Contact with the exhaust area can result in serious burns.
Exhaust heat/gases can ignite combustibles, structures or damage
fuel tank causing a fire.
9.1. How to shut down your pressure washer
9.1.1. Release the spray gun trigger and let the engine idle down.
9.1.2. Turn the engine switch to the OFF position.
9.1.3. ALWAYS point the spray gun in a safe direction, squeeze the spray gun trigger to release
the retained high water pressure.
IMPORTANT
The spray gun traps high water pressure, even when the engine has stopped and water disconnected.
The couplings will not release if they are under pressure. To release hoses and coupling ALWAYS de-
pressurise by operating the trigger.
Page 19

Related product manuals