12
13
• Keep children and all bystanders at a safe distance from work area.
• It is absolutely essential that you know the safe and proper use of the
power tool or appliance that you intend to use. All operators must read,
understand and follow the tool / appliance owners manual. Tool and
appliance applications and limitations must be understood. Follow all
directions given on labels and warnings. Keep all instruction manuals
and literature in a safe place for future reference.
• Use only “LISTED” extension cords. When a tool or appliance is used
outdoors, use only extension cords marked “For Outdoor Use”.
Extension cords, when not in use should be stored in a dry and well
ventilated area.
• Always switch off generator’s AC circuit breaker and disconnect tools
or appliances when not in use, before servicing, adjusting, or installing
accessories and attachments.
• Make sure the engine is stopped before starting any maintenance,
servicing or repair.
NOTE: Make sure maintenance and repair of the generator are performed
by properly trained personnel only.
SAVE THESE INSTRUCTIONS
Glossary
SYMBOL NAME MEANING
V Volt Voltage
A Ampere Current
H
Z Hertz Frequency (1Hz=60 r/min)
W Watt Power
RPM Revolutions per Minute Engine Speed
PF Power Factor Load transfer efficiency
G1 Performance Rate
Generator output power perfor-
mance rate meat ISO8528G1
The following symbols are quoted on the machine or in this manual.
By understaning their meanings and definitions, your operation of this
generator will become easier and safer.
SAFETY GLOSSARY
To Next Page
Loading...
