18
UNPACKING HK175fW
ASSEMBly HK175fW
1. Remove heater from carton.
2. Remove all protective material which may have been applied to the
heater for shipment.
3. Check the heater for possible shipping damage. If any damage is
found immediately contact the manufacturer
NOTE: Save the box and packaging materials for future storage.
1. Insert the axle to the front handle hole, insert wheels to the axle and
put on axle cap.
2. Put the front handle to the fuel tank holes. Insert screws in the holes
and tighten screws securely with screw driver.
3. Fix the cord wraps to the handle, Then put the handle and foot to the
fuel tank holes ,Insert screws in the holes and tighten screws securely
with screw driver.
pre-operation
UNPACKING HK175FW
ASSEMBLY HK175FW
1. Remove heater from carton.
2. Remove all protective material which may have been applied to the
heater for shipment.
3. Check the heater for possible shipping damage. If any damage is
found immediately contact the manufacturer.
NOTE: Save the box and packaging materials for future storage.
1. Insert the axle to the front handle hole, insert wheels to the axle and
put on axle cap.
2. Put the front handle to the fuel tank holes. Insert screws in the holes
and tighten screws securely with screw driver.
3. Fix the cord wraps to the handle, Then put the handle and foot to the
fuel tank holes ,Insert screws in the holes and tighten screws securely
with screw driver.
PRE-OPERATION
To Next Page
Loading...
