EasyManua.ls Logo

BE P1415EN - LIMITED WARRANTY; Warranty Process

BE P1415EN
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 17
This product is under warranty to the original retail consumer against defects
in material and workmanship for a period of 1 (one) year and is a complete
“bumper to bumper” warranty including the spray gun, the high pressure hose
and all accessories from the date of purchase. The warranty is not transferable
or assignable. This warranty covers replacement parts. This limited one year
warranty applies only to products used in consumer applications and is
void in rental or any commercial application. Reasonable care must be used
in conformity with operation and maintenance instructions in the owner’s
manual and quick start guide. Failure to follow these instructions will void this
warranty. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Warranty Process
To place a warranty claim, go to the support section of BE’s website at
bepowerequipment.com and fill out the online form with the following
information:
1. Dealer Information (Contact name and number)
2. Product Model Number and Serial Number
3. Electronic Copy of Customer Invoice
4. Explanation of defect or how it is not performing properly
a) Troubleshooting steps already taken
5. Pictures of product including:
a) Picture of whole unit showing condition
b) Picture of serial number
c) A close up picture of problem area (leaking oil, water, broken part, etc)
You can also contact our technical support at 1-866-850-6662.
TROUBLESHOOTING
LIMITED WARRANTY

Related product manuals