CHECKING THE WATER FILTER
HOW TO USE THE DETERGENT KIT
GENERAL PRECAUTIONS FOR USE (continued)
8. While the machine is running, do not cover it and do not place it in an cnclosed space with insufficient ventilation.
9. Do not leave the machine running for more than 5 minutes with the gun closed. Should it run for a longer period,
the temperature of the recirculating water will increase rapidly and could risk damaging the pump and pump seals.
10. When the machine is not in use, lock gun trigger in safe position to prevent it from being opened by accident.
11. For the sake of safety use only approved spare parts and accessories.
HOW TO USE THE VARIABLE NOZZLE
A) Selection of high or low
pressure by push-pull action.
The selection of the pressure
must be carried out with the gun
in closed position (1).
B) Adjustment from straight (4)
to fan (5) of water jet by simple
turning of the NOZZLE.
HOW TO USE THE DETERGENT KIT
The unit can suck and mix detergents and other liquid chemicals
thanks to an automatic device incorporated in the unit itself, which
is remote-controlled by operating the variable nozzle. The unit is
equipped
with a chemical suction kit (Fig A).
- Fit the siphon hose into the chemical
injector and filter into chemical
container
(Fig. B).
- Select low pressure with the variable
nozzle (Fig. C)
- At this point the suction and mixing of the
chemical will start automatically.
- When you wish to stop using chemicals in
order to clean or rinse, simply release the
gun trigger and adjust the variable nozzle
to high pressure.
- At this point the chemical injection
automatically stops.
- If you foresee not using the unit for a long
period of time, we suggest to clean the
chemical suction kit with clear water to
avoid chemical deposit build-up.
CHECKING THE WATER FILTER
It is important
to check the
filter before
using the
machine.
Remember that a
well-cleaned
filter means
good performance
and long life for
your machine.
Low pressure
High pressure
GENERAL PRECAUTIONS FOR USE (continued)
8. While the machine is running, do not cover it and do not place it in an cnclosed space with insufficient ventilation.
9. Do not leave the machine running for more than 5 minutes with the gun closed. Should it run for a longer period,
the temperature of the recirculating water will increase rapidly and could risk damaging the pump and pump seals.
10. When the machine is not in use, lock gun trigger in safe position to prevent it from being opened by accident.
11. For the sake of safety use only approved spare parts and accessories.
HOW TO USE THE VARIABLE NOZZLE
A) Selection of high or low
pressure by push-pull action.
The selection of the pressure
must be carried out with the gun
in closed position (1).
B) Adjustment from straight (4)
to fan (5) of water jet by simple
turning of the NOZZLE.
HOW TO USE THE DETERGENT KIT
The unit can suck and mix detergents and other liquid chemicals
thanks to an automatic device incorporated in the unit itself, which
is remote-controlled by operating the variable nozzle. The unit is
equipped
with a chemical suction kit (Fig A).
- Fit the siphon hose into the chemical
injector and filter into chemical
container
(Fig. B).
- Select low pressure with the variable
nozzle (Fig. C)
- At this point the suction and mixing of the
chemical will start automatically.
- When you wish to stop using chemicals in
order to clean or rinse, simply release the
gun trigger and adjust the variable nozzle
to high pressure.
- At this point the chemical injection
automatically stops.
- If you foresee not using the unit for a long
period of time, we suggest to clean the
chemical suction kit with clear water to
avoid chemical deposit build-up.
CHECKING THE WATER FILTER
It is important
to check the
filter before
using the
machine.
Remember that a
well-cleaned
filter means
good performance
and long life for
your machine.
Low pressure
High pressure
It is important to check the filter before using the
machine. Remember that a well-cleaned filter means
good performance and long life for your machine.
The unit can suck and mix detergents and other liquid chemicals thanks to an
automatic device incorporated in the unit itself, which is remote-controlled by
operating the variable nozzle. The unit is equipped with a chemical suction kit (Fig
A).
- Fit the siphon hose into the chemical injector and filter into chemical container (Fig.
B).
- Select low pressure with the variable nozzle (Fig. C)
- At this point the suction and mixing of the chemical will start automatically.
- When you wish to stop using chemicals in order to clean or rinse, simply release
the gun trigger and adjust the variable nozzle to high pressure.
- At this point the chemical injection automatically stops.
- If you foresee not using the unit for a long period of time, we suggest to clean the
chemical suction kit with clear water to avoid chemical deposit build-up.
P1515EPN_P1515EPWN Genpower Manual_2016.indd 16 1/5/2016 10:59:53 AM
To Next Page
Loading...
