BEA 10KEYPADU User Guide

75.5892.03 KEYPADS 20171013 Page 1 of 5
10KEYPADU & 10KEYPADUSL
12 3
3
4
4
12
75.5892.03 KEYPADS 20171013 Page 1 of 5
2 Specications
USER’S GUIDE
STANDALONE ACCESS CONTROL KEYPAD
1 Description
BEA keypads 10KEYPADU and 10KEYPADUSL (slimline) offer
eld-proven reliability and cost-effective solutions anywhere
access control is desired.
BEA keypads are waterproof and dustproof with IP66
protection rating. Keypads allow for up to 1010 users (zone 1:
1000 users, zone 2: 10 users), and incorporate a tamper alarm
and a doorbell feature as standard options.
These are ideal for integration into security systems with
electromagnetic locks, electric strikes, restricted access
elevators, or gates and other types of equipment requiring on/
off or momentary control inputs.
All programming is completed entirely from the keypad.
DESCRIPTION SPECIFICATION
Supply voltage: 12 – 24 VAC/VDC (DO NOT EXCEED 30VDC or 24VAC)
Standby current: ≤ 30 mA
Working current: ≤ 160 mA
Max user codes: 1010 ( zone 1: 1000 users, zone 2: 10 users)
Relock time: 0 – 99 seconds
Output: 2 relays (free of potential change-over contact)
Max. contact voltage: 42 VAC/VDC
Max. contact current: 1 A (resistive)
Max. switching power: 30 W (VDC) / 48 VA (VAC)
Cable length: 3 ft
Operating temperature: -22 – 158 °F
Operating humidity: 0 – 95% (non-condensing)
IP rating: IP66 (waterproof and dustproof)
Dimension: 10KEYPADU: 3.0” (W) x 4.7” (H) x 0.9” (D) – (76 mm x 120 mm x 22 mm)
10KEYPADUSL: 1.7” (W) x 5.9” (H) x 0.95” (D) – (44 mm x 150 mm x 24 mm)
Certication: CE, RoHS
Backlight: Blue keypad illumination
3 Precautions

Shut off all power before attempting any wiring procedures.

Maintain a clean & safe environment when.

Constantly be aware of pedestrian trafc around the door area.

Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause
damage to equipment.

Ensure compliance with all applicable safety standards and building codes upon completion of installation.
1. Mode LED
2. Door LED
3. Matrix keypad
4. Case screw
(bottom of case)
WARNING:
Product will be damaged and warranty will be voided if supply voltage exceeds 30VDC or 24VAC. This product shall not be
used with a BEA part number 1024VAC transformer or any standard, non-regulated 24VAC transformer as the measured
voltage exceeds 24 VAC.

BEA 10KEYPADU Specifications

General

Brand	BEA
Model	10KEYPADU
Category	Keypad
Language	English