BEA LZR- FLATSCAN REV-PZ User Manual

LZR
®
- FLATSCAN REV-PZ
E
R
L
A
U
B
T
Z
E
R
T
I
F
I
Z
I
E
R
U
N
G
N
A
C
H
DIN 18650
E
N
A
B
L
E
S
A
C
C
O
R
D
A
N
C
E
W
I
T
H
E
R
L
A
U
B
T
Z
E
R
T
I
F
I
Z
I
E
R
U
N
G
N
A
C
H
EN 16005
E
N
A
B
L
E
S
A
C
C
O
R
D
A
N
C
E
W
I
T
H
PLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOUR PRINTING
User’s Guide for product version 0100 and higher
COMPACT LASER SCANNER FOR THE SAFETY OF
REVOLVING DOORS
EN

BEA LZR- FLATSCAN REV-PZ Specifications

General

Brand	BEA
Model	LZR- FLATSCAN REV-PZ
Category	Security Sensors
Language	English

Summary

Description and Signals

LED Signals

Explains the meaning of different LED light signals indicating device status and detections.

Symbols Used

Provides a guide to the various symbols and icons used throughout the user's guide.

Safety Tips and Maintenance

Laser Radiation Caution

Warns about laser radiation hazards during installation and use, emphasizing eye safety.

General Safety Practices

Covers essential safety measures like proper earthing, use by qualified personnel, and testing procedures.

Environmental & Handling Precautions

Details precautions regarding vibrations, light sources, smoke, fog, condensation, and cleaning methods.

Power and Temperature Guidelines

Advises on maintaining sensor power in cold environments and avoiding extreme temperature changes.

Installation Procedures

DIP Switch Configuration

Explains the function and settings of the DIP switches for various operational modes.

Sensor Mounting Procedure

Provides instructions on correctly positioning and securing the sensor unit.

Wiring Connections

Details the electrical connections required for power supply and output signals of the sensor.

Adjustments and Settings

Push Button Functions

Describes the operations triggered by different durations of push button presses.

Visible Spots for Positioning

Explains how to activate and use visible laser spots for precise curtain positioning.

Curtain Position Adjustment

Guides on adjusting the sensor's tilt angle using visible spots for optimal detection.

Detection Zone Setting and Teach-In

Automatic Teach-In Process

Step-by-step guide for the automatic detection zone learning process.

Remote Control Zone Setting

Instructions for configuring detection zone widths using the remote control.

Final Installation Steps

Covers attaching the front cover and protecting the laser window after installation.

Parameter Settings

Detection Field Parameters

Details settings for detection field width, height, and specific parameter values.

Output Configuration & Redirection

Explains how to configure and redirect sensor output signals (Relay, Opto).

Uncovered Zone & Hold Time

Covers setting the uncovered zone size and the hold time for detections.

How to Use the Remote Control

Access and Security

Explains unlocking, access codes, and managing sensor access via the remote.

Parameter Adjustment & Checking

Guides on adjusting multiple parameters, checking values, and modifying detection fields.

Remote Control Teach-In Functions

Details how to initiate teach-in and environment learning using the remote control.

Remote Control Functions

LED and Visible Spot Control

Instructions for enabling/disabling LEDs and turning visible spots on/off.

Service Mode and Resets

Explains how to enter service mode and perform factory resets with different options.

Troubleshooting Common Issues

Reaction and Detection Issues

Addresses problems like unexpected reactions, no reaction, bad teach-in, and power supply issues.

Remote Control and Access Problems

Covers troubleshooting for incorrect DIP settings, password protection, and remote access timeouts.

Troubleshooting Advanced Issues

Orange LED Error Indicators

Interprets various orange LED flash patterns indicating memory, DIP-switch, or internal faults.

Field and Teach-in Error Resolution

Guides on resolving issues related to detection field masking, background detection, and teach-in errors.

Technical Specifications

Product Specifications Overview

Provides detailed technical data including technology, dimensions, operating conditions, and compliance standards.