— 14 —
5. Remote Control
The Bear Polar comes standard with an infrared
remote control.
The remote can control all functions of the laser
except power on/off and anti-drift mode on/off.
The buttons on the remote control coincide exactly
with the buttons on the control panel of the laser
(refer to 2.3) and all functions are operated in
the same manner.
Operating distance of the remote control is
up to 20m.
The red LED on the remote control will flash to
show that the operating signal has been sent to
the laser when a key is pressed.
Remote
To Next Page
Loading...
Need help?
General