Need help?Do you have a question about the Bear POLAR and is the answer not in the manual?
General| Brand | Bear |
|---|---|
| Model | POLAR |
| Category | Measuring Instruments |
| Language | English |
Identifies the different parts of the laser instrument's housing.
Identifies the buttons and indicators on the laser instrument's control panel.
Procedure for setting up and performing horizontal leveling with the laser.
Procedure for setting up and performing vertical leveling with the laser.
How to adjust the rotation speed of the laser beam for different applications.
How to use the scan mode and adjust scan angles for visibility and interference reduction.
How to adjust the clockwise or anti-clockwise positioning of the laser beam.
How to activate and understand the anti-drift system to maintain leveling accuracy.
Procedure for setting manual slopes or grades for the laser beam.
Procedure for checking horizontal and vertical calibration of the laser instrument.
Steps to adjust the laser's horizontal calibration in X and Y axes.
Procedure to check if the laser's vertical beam aligns with a plumb line.
Steps to adjust the laser's vertical calibration to match a plumb line.
To Next Page