Beats Flex User Manual

Set up and use your Beats Flex earphones
after service
Learn how to charge, pair, and use your Beats Flex.
Turn on and charge your Beats Flex
The power button is on the right control module. Press and hold the button for 1 second to turn
your earphones on or off.
To charge, plug your earphones into a power source using the included USB-C cable. Your
earphones provide up to 12 hours of playback from a full charge.
When your earphones are turned on and set up, the LED indicator light on the power button
shows how much listening time is left:
 White: more than an hour left
 Red: less than an hour left
 Blinking red: needs to charge

Beats Flex Specifications

General

Type	In-ear
Chip	Apple W1
Battery Life	Up to 12 hours
Charging Connector	USB-C
Fast Fuel Charging	10-minute charge provides 1.5 hours of playback
Magnetic Earbuds	Yes
Weight	18.6 grams
Connectivity	Bluetooth
Microphone	Built-in
Controls	On-device controls for voice assistant
Water Resistance	No official rating
Colors	Black, Yuzu Yellow, Smoke Gray, Flame Blue
Compatibility	Apple and Android