Drive Control
DC RS alpha
Issue 09/99
33
Electrical data
Supply voltage 10 VDC up to 30 VDC. Requires setting via jumper
(refer to section 3.1).
Rated motor current 10 A max. (temperature monitored)
5 A permanent current
Switch-off current Switch-on peak current 40 A
Limit of motor current Adjustable 1 A up to 10 A (in 100 mA steps)
Speed accuracy +/- 5 % (at 24 V supply voltage and motor operation
50 % PWM)
Digital inputs For floating n.o. contacts, approx. 2 mA
Output switching
frequency of motor
output
approx. 20 kHz max. (motor PWM)
Ramp function Starting ramp 0,1 sec. ... 25,5 sec. in 0,1 sec. steps
Stopping ramp 0,1 sec. ... 25,5 sec. in 0,1 sec. steps
Interfaces
Serial interface for programming interface BeCon
To Next Page
Loading...