bebro electronic DC RS alpha - 4 Maintenance; 5 Removal from Operation and Disposal; 6 Transport and Storage; 7 Accessory Equipment

Drive Control
DC RS alpha
Issue 09/99
40
4 Maintenance
The drive controller DC RS alpha is maintenance-free. It contains no
components which can be maintained or repaired.
In case of an error send the device to your distributor or bebro electronic GmbH.
The relevant address is listed on page 22.
5 Removal from operation and disposal
Devices taken out of operation has to be disposed or reused according to the
valid legal requirements.
For further information please contact the responsible environmental authority or
bebro electronic GmbH. The relevant address is listed on page 22.
6 Transport and storage
After the device has left the factory the drive controller may only be transported
in packaging suitable for electronic devices.
Permissible temperatures
for storage and transport: -25 up to 85°C
Permissible relative humidity: 95 % max., non-condensing
7 Accessory equipment
Description Reference number
DIN rail adapter for 35 mm DIN rail 250 01 37x
BeCon
PC software for PLC-programming and assigning of motor
parameters for Windows
®
95 / 98 / NT. The BeCon package
includes the level converter PW RS232 and a connection adapter.
250 01 33x
If you need further accessory equipment or you have any questions please contact
bebro electronic GmbH. The relevant address is listed on page 22.