Explanation of functions
Roller shutter selection
With the roller shutter function, the roller shutter runs in maintained operation
mode after a travel button is pressed.
Venetian blind selection
With the venetian blind function, the venetian blind runs in touch mode to facil-
itate precise positioning of the laths. If you press a travel button for longer than
1second, the venetian blind runs in maintained operation mode.
After moving to the programmed intermediate and end positions, the laths
automatically tilt (if the tilt position was programmed).
Manual/Automatic slide switch
In slide switch position "
" only manual drive commands can be performed
(e.g.: UP, STOP, DOWN via button actuation).
In slide switch position "
" automatic drive commands are performed (e.g.
time, Astro evening function,...)
Operating mode
On the display, you see the time and the current operating mode e.g. HOLI-
DAY.
OK button
The displayed values are saved by pressing the OK button in the menu.
+/- buttons
The following operations are possible via + and -:
• Menu ->Modify value
• Auto mode ->Retrieve information
∙ + button ->Next automatic switching time
∙ - button ->Next automatic switching time
∙ - button and OK button -> Astro time
MENU button
By pressing the MENU button, you access the menu overview or Operating
mode.
The displayed value is not saved.
32-en
To Next Page
Loading...
