Becker Centronic TimeControl TC445-II - Advanced Settings and Customization; Holiday, Position, and Limit Settings

fr
en
de
nl

Automatic switching times for roller shutters and venetian blinds to be raised
and lower ed in all receivers that have been programmed.
Programming will not take effect if the sign: --:-- is showing on your display.
(--:-- is located between 23.59 and 00:00).
MenuSettings
SETTINGS
The following settings can be made via the SETTING menu:
• HOLIDAY
• INTERMEDIATE POSITION
• VENTILATION/REVERSE
• PROG (END LIMIT, INTERMEDIATE POSITION, VENTILATION/REVERSE)
• Select language (ENGLISH GB)
• ASTRO SHIFT t
• Select town/city (LONDON)
• LONGITUDE (Displayed in EXPERT MODE only)
• LATITUDE (Displayed in EXPERT MODE only)
• TIME ZONE (Displayed in EXPERT MODE only)
• SUMMER/WINTER (Automatic clock adjustment for daylight saving changes)
To set a function, press the OKbutton until you come to the required menu level.
HOLIDAYSETTING
The holiday setting simulates an occupied house while you are on holiday.
If the function is activated (ON), the roller shutter/venetian blind varies randomly
from the programmed times (max.+ 30 mins.).
ENDLIMIT
The end limit is the point where the roller shutter/venetian blind is in the upper
or lower position.
INTERMEDIATEPOSITION
The intermediate position is a position of the roller shutter/venetian blind be-
tween the upper and lower limits that can be freely selected. This position can
also be reached from the upper position after programming.
Press the DOWNbutton twicein rapid succession to move to the intermediate
position.
VENTILATION/REVERSE
The ventilation/reversing position is a position of the roller shutter/venetian
blind between the upper and lower limits that can be freely selected. Using this