Becker DTM - Page 49

118
5DGLR0RGH
,QWHUUXSWLQJ73$QQRXQFHPHQWV
Briefly press the button briefly.
The announcement currently being broadcast will be interrup-
ted and the system will automatically return to the previously
selected mode.
73$QQRXQFHPHQW9ROXPH
Activate the TP menu. Press the multifunction button .
With the right rotary control , four different settings (
 - )
can be selected. This means that the volume can be raised to
a fixed value according to the setting.
• Setting
 - No increase
• Setting
 - Slight increase
• Setting
 - Medium increase
• Setting
 - Strong increase
6ZLWFKLQJ70&2Q2II
1RWH Further information on TMC can be found under
”Dynamic Route Guidance” on Page 106.
Activate TP Menu
6ZLWFKLQJRQ:
Repeatedly press the multifunction button until
!65 appears.
If TMC is switched on, no traffic programme stations can be
freely selected. If receivable, the unit will select a TMC stati-
on. This station is then the traffic programme station.
6ZLWFKLQJRII
Repeatedly press the multifunction button until
!6-- appears.
If TMC is switched off, a traffic programme can be freely
selected.
1RWH No dynamic navigation functions (Dynamic Route,
Traffic Information) can be selected or called up.
73
#63
EM
!7 ;( #63 !4*
,+
!7 ;( #63 !4*
!4*
!4*