Beckett AFII User Manual

RESIDENTIAL BURNERS
Potential for Fire, Smoke and Asphyxiation Hazards
To the Homeowner or Equipment Owner:
Please read and carefully follow all instructions
provided in this manual regarding your
responsibilities in caring for your heating
equipment.
Contact a professional, qualifi ed service agency for
installation, start-up or service work.
Save this manual for future reference.
y
y
y
Incorrect installation, adjustment, or misuse of this burner could result in death, severe
personal injury, or substantial property damage.
To the Professional, Qualifi ed Installer or Service Agency:
Please read and carefully follow all instructions provided
in this manual before installing, starting, or servicing this
burner or heating system.
The Installation must be made in accordance with all state
and local codes having jurisdiction.
y
y

Beckett AFII Specifications

General

Fuel Type	Oil
Ignition	Solid State
Application	Residential and Light Commercial
Voltage	120V
Frequency	60 Hz
Motor Speed	3450 RPM
Motor	PSC
Nozzle Angle	30° - 90°
Motor HP	1/7
Air Tube Lengths	6"

Summary

General Information and Safety

Hazard Definitions

Defines hazard symbols (DANGER, WARNING, CAUTION, NOTICE) used in the manual.

Professional Service Requirement

Emphasizes the necessity of qualified professional installation and service.

Owner's Responsibility Guidelines

Outlines homeowner duties and essential safety precautions for operation.

Installation Site Preparation

Chimney and Vent System Inspection

Chimney Hazard Warnings

Highlights dangers of improper chimney systems and acid condensation.

Combustion Air Supply

Burner Controls and Operation

Genisys 7505 Control Overview

Control Wiring Safety

Safety warnings and general advice for wiring burner controls.

Burner Sequence of Operation

R7184P Control Specifics

Startup and Combustion Adjustment

Initial Burner Startup

Procedures for initial startup, including pump priming.

Setting Combustion with Instruments

Guidelines for adjusting combustion parameters using test equipment.

Regular Maintenance Procedures

Annual Professional Service

Emphasizes the necessity of annual servicing by qualified technicians.

Routine Maintenance Tasks

Nozzle Line Service and Replacement

Electrode and Blower Wheel Maintenance