Commissioning
Setting/command Area Default value Description UPS soft-
ware ver-
sion
Combo box (task list) Task Sched-
uler tasks
"UPS System
Shutdown
Program"
Please do not forget to set the user
name and his password during the
configuration of the shutdown task.
The shutdown task is managed by
the Windows Task Scheduler and
can only be executed in a certain
user context. The configured user
may require special access rights
to the system, drives, etc. If the
configured user name/password
corresponds to the logged-in user,
the shutdown task is interactively
executed (visible in the
foreground). "NT AUTHORITY
\SYSTEM" can be also entered as
the system user account (system
account, a password is not
necessary in this case). The
system user account has full
access to the local computer, but
no access rights to other systems
in the network or mapped network
drives. Please do not use dialog
applications that require user
inputs. These would only obstruct
the shutdown process. The
application should terminate itself
at the latest after 30 seconds.
Further information can be found in
the Windows Task Scheduler
documentation.
v3.0.0.10
New... - "UPS System
Shutdown
Program"
Creates a new Task Scheduler task
with a specified default name: "UPS
System Shutdown Program". This
function is only available under XP
and also only if the task with the
default name does not yet exist in
the list of tasks. Under Windows
Vista and 7 please use the Task
Scheduler dialog in the MMC
(Microsoft Management Console) in
order to create a new task.
v3.0.0.10
Edit... - "UPS System
Shutdown
Program"
Configures the Task Scheduler
tasks which should be executed by
the UPS service before the
initialization of the operation system
shutdown. This function is only
available under XP. Under
Windows Vista and 7 please use
the Task Scheduler dialog in the
MMC (Microsoft Management
Console) in order to configure a
new task.
v3.0.0.10
CX2100-09x4 53Version: 1.3
To Next Page
Loading...
Need help?
General
