Beechcraft 20138 - Adjustmentin the Aircraft; Adjustmentand Maintenance; Location of Adjustments

SECTION
IV
-
ADJUSTMENTAND
MAINTENANCE
4-1
ADJUSTMENT
IN THE
AIRCRAFT
The two adjustments
that
can
be
made with the unit installed in
the
aircraft
are:
(1)
regulator voltage adjust
and
(2)
overvoltage
tripout
adjust. Both these adjustments are accessable
through
the
case,
after
removal of
the plastic
dust
covers.
(Figure
4-1)
5.06
5.63
MAX.
;--CONNECTOR MS3102A-IB
\P
FIG.
4-1
LOCATION
OF ADJUSTMENTS
Equipment
required:
John
Fluke Model 801
voltmeter
(alternatively,
but with
less accuracy, Simpson
Model 260
or Triplett
Model
630
volt-ohm-
milliammeter).
Small
screwdriver (metallic or
non-metallic).
4-1