Table 1-1. SUPER
BEE
Computer Terminal Specifications
CHARACTERISTIC
DESCRIPTION
Power Requirements
115/230 Vac (+ 10 percent), 50/60 Hz, single
phase,
180W maximum
225
VA
maximum.
Display Size
Standard
12 inches (305 mm) rectangular. (112-0601)
Optional
15 inches (381 MM) rectangular. (112-0602)
Active Display Size
Standard
6-1/2 inches x 7-1/2 inches (165 mm x 190 mm) approx. (112-0601)
Optional
8 inches x 10 inches (203 mm x 254 mm approx. (112-0602)
Display Format
25 lines
of
80 characters.
Character Type
Standard
5 x 7
dot
matrix
(7 x 10 scan), approximately 0.08 x 0.20 inches.
Character Set
224 displayable
as
follows:
32 control characters (in Program
Entry
mode)
64
upper
case
ASCII
set
32 lower
case
ASCII
set
(with
descenders shifted down
two
scans)
96
escape
sequence control codes (in Program
Entry
mode)
Page
Overflow
Upward scroll - No
loss
of
data
until
memory overflow.
Memory Overflow
Wrap around and first line
of
data
is
lost
from
memory.
Communications
Interface
Per
EIA
Standard RS232C.
1-9
To Next Page
Loading...