7
Special Features
The scale comes standard with these special features.
1. Auto-Zero: The scale will automatically display “0.0” when turned on. If the
display reads between “-1.0” and “1.0” at any time, regardless of what is on the
platform, the scale will automatically reset to “0.0” after 8 seconds.
2. English/Metric Readout: With normal operation, you may switch the display
units between kilograms and pounds at any time before or after a weighing.
When turned on, the scale will display the last used unit of measure. (See pg 9)
3. Smart View Display: The CX7 console shows only the information you want:
weight only or weight, height, and BMI.
4. Body Mass Index Calculator with Clothing Deduction: When calculating body
mass index, a clothing deduction can be user-programmed from 0.0 to 6.0 lbs.
Factory setting is 2.5 lbs. (See pg 8)
5. MotionLock Technology: In most cases the scale will display a true, accurate
weight based on a series of consistent and stable measurements. However, if a
person or object is moving on the platform, the scale may not achieve consistent
readings that are required to give a “stable” weight. This condition is indicated by
moving dashes on the display. If movement on the platform continues for seven
seconds, the scale will automatically activate the MotionLock feature and
“AVG WT” will be displayed on the console.
Because of the movement on the platform, average weight indicates that the
scale was not able to achieve a true measurement in line with the listed accuracy
specification. However, the average weight deviation from the true weight of a
person or object will be minimal, based on the severity of the motion during the
weight reading.
6. Auto-Off: As a battery saving feature, the scale will automatically turn off when
not being used. The Auto-Off feature does not apply to 120V AC power use. The
length of the Auto-Off timeout is programmable by the user. (See pg 10)
7. Always-On: As a time saving feature, the scale can take normal weighings
without the need to press any buttons. Simply stand on the scale and the weight
will be displayed within seconds. (See pg 11)
8. Tare: An object weighing more than 1.6 lbs. (ie. cane) can be subtracted from the
total weight to determine net weight. (See pg 9)
9. ECO Weigh: Befour’s exclusive ECO Weigh battery management system
provides many more weighings (100,000+) per set of batteries than other brands
of scales (5 x when compared to other D cell powered scales, 10 x compared to
C cell powered scales, and 50 x compared to AA celled scales). Over the life of
the scale, the savings from battery replacement costs (in both batteries, and more
importantly, time) are substantial.
To Next Page
Loading...