28
86107 BA-en/01
English
⋅
Fornax
®
T
Service and Maintenance
If necessary, clean the machine on the outside with
a dry or slightly moist cloth.
Check the casting chamber daily for impurities
(casting pearls) and if necessary clean with cloth or
vacuum cleaner.
Warning of electric shock!
Danger to life!
Switch off the machine and pull out
the mains plug before performing any
care or maintenance work.
For power connection without mains
plug: remove fuses, secure the
devices against restart and make sure
that it is not live.
Burn hazard from hot parts!
Carry out maintenance and cleaning
work before working or only after the
machine has cooled down.
ATTENTION!
Do not use compressed air for cleaning as
residues (casting beads) may get caught in the
coil windings and subsequently inhibit heating!
Remove any contamination from both side of the
sight glass at regular intervals.
To Next Page
Loading...
Need help?
General
