Bego Fornax T User Manual

16
86107 BA-en/01
English ⋅ Fornax
®
T
en
Basic principles
Switching the device on and off
1. Use the main switch on the right side of the
unit to switch the unit on and off.
Opening the device
The device can be opened if the indicator light next
to the "open cover" button is on.
1. Press button "Open cover"
2. Lift the cover.
.
Adjust crucible insert
The rotation acceleration of the spinning process
needs to be reduced when a graphite or glassy
carbon insert is used to melt precious metals.
1. Adjust the crucible insert by pressing the "cru-
cible insert" button.
2. The adjusted crucible is displayed by the sta-
tus of the control lamps (see illustration).
NOTICE
Important!
Before starting up please read and observe the
operating instructions, especially the safety
instructions (page 7), in order to prevent damage
to property and injury to persons.
NOTICE
If the unit is not properly locked, the indicator light
next to the "open cover" button will flash. Slightly
raise the cover and close/lock it again.

Bego Fornax T Specifications

General

Brand	Bego
Model	Fornax T
Category	Dental equipment
Language	English