Electricity
Prior to the electrical connection check whether the
specifications on the rating plate correspond to the
power supply network. In the case of uncertainty,
consult an electrician.
The machine is subject to the provisions of class of
protection I and may only be connected to properly
grounded power sources.
Installation in countries without 230 V network:
The electrical installation may only be carried out by
a qualified electrician!
Remove the mains plug and replace with a plug
suitable to local conditions.
The machine is subject to the provisions of class of
protection I and may only be connected to properly
grounded power sources.
Compressed air
1/4 "
5 .... 8 bar
(0.5 .... 0.8 MPa) (72.5 .... 116 psi)
≥ 100 l / min
An inadequate compressed air supply during
casting under pressure (warning message W 11)
can be compensated for with the compressed air
tank (REF 16260). An inadequate compressed air
supply during evacuation (warning messages W 02,
W 13) cannot be compensated for with the
compressed air tank.
Remove protective cap
Remove the cap from the precision optical system.
Docking station and USB stick
(only NAUTILUS
®
CC plus)
Connect the docking station and insert the USB
stick.
To Next Page
Loading...
Need help?
General
