English
⋅
Nautilus
®
CC plus
⋅
Nautilus
®
T
9
86066 BA-en/00 357.00001.../ 358.00001...
Special safety instructions regarding this machine
Hazards due to electromagnetic
radiation
• Persons with electronic implants
(for instance, pacemakers) may not
remain in the same room in which
the ready-to-operate machine is
located.
• The warning signs provided (sym-
bol: "pacemaker") are to be placed
at the entrances to the room in
which the ready-to-operate machine
is located.
Risk of burns due to hot parts!
• Wear protective clothing (protective
apron), safety shoes, safety gog-
gles and protective gloves.
• Heat-resistant gloves must be worn
when holding the handles of the cru-
cible.
• Open the lower chamber only to
move the moulds. Otherwise always
keep it closed.
• Always use mould tongs to move
moulds and hot crucibles.
• Touch hot crucible inserts and hot
cast metal parts only with forceps.
Danger of deflagration
• Ensure alloys, crucible and crucible
inserts do not become contaminat-
ed. Oil or fat impurities may evapo-
rate explosively during the casting
process.
Danger from waste gases
• Ensure there is adequate ventilation
in view of the waste gases arising
during the casting of dental alloys.
Dangers from the touchscreen
• Any liquid that leaks as a result of
damage is toxic and corrosive!
Avoid contact with the skin, swal-
lowing or breathing in!
Important !
Never operate the machine without supervision,
even in automatic mode!