Bego VarseoWax - Creating 3 D Printing Parameters for Varseowax Model

5
Now create the 3D printing parameters for VarseoWax Model (see
video tutorial).
Double-click to open the Photon Workshop nesting software. Go to
Configure in the menu bar and select the Photon Mono X* printer
under the Machine Type option to obtain the correct basic settings.
To create a material file for VarseoWax Model, go to the Configure
tab in the menu bar and select the Resin Manage option.
3. Creating 3D Printing Parameters
for VarseoWax Model
Go directly to the video tutorial at:
www.bego.com/3d-printing/compatibility-overview/#anycubic
2. Installation Nesting Software “Photon Workshop”