9
* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.
Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.
6. 3D Printing
• Make sure that the resin tray is filled with sufficient resin and that
the stamp is firmly fixed in the 3D printer
• Insert the USB flash drive into the Anycubic Photon Mono X* USB
slot and select the Print button from the menu
• Select the file to be printed and start the 3D printing by pressing
the Play icon
• 3D printing will now start automatically
To Next Page
Loading...
Need help?
General
