Bego VarseoWax - Creating the Support Structure Parameters for Varseowax Model

7
Now create the support structures for the print objects from
VarseoWax Model (see also video tutorial).
To access the support settings, click on the following icon:
Different indications require adapted support structures to obtain a
successful print.
For the indication “Model” (VarseoWax Model), we therefore
recommend the following adjustments:
1. Supports: Light
2. Contact depth (mm): 0.60
3. Support Density (%): 100.00
4. Creating the Support Structure Parameters
for VarseoWax Model
Go directly to the video tutorial at:
www.bego.com/3d-printing/compatibility-overview/#anycubic