BEHA UNITEST CHB 15 - 6 Technical Data

28
6.0 Technical data (BEHA reserves the right to make changes)
UNITEST Clamp Meter CHB 35/CHB 15
Display: 3
3
/4digit, digital LC-display. Shows
also functions and symbols
Bargraph: 40 segments
Range selection: manual/frequency measurement:
automatic
Polarity display: automatic, “–“ sign for negative inputs
Display of range exceeded:MSD blinks
Rate of measurement: 20 per second. (bargraph),
2 per second. (digital display)
max. conductor diameter: approx. 23 mm
Overvoltage catergory: CAT II, 600 V
Pollution degree: 2
Hight above MSL: up to 2000 m
Battery indicator: Symbol “Low Batt “ appears.
Power supply: Battery 1,5 V IEC LR6 (Alkaline)
Power consumption: approx. 10 mA
Operating temperature: -10° C … 50° C
Storage temperature: -20° C … 60° C
Humidity: below 75 % relative humidity
Dimensions: 183 x 63,6 x 35,6 mm
Weight approx. 190 g
UNITEST Clamp Adapter CHB 10
Display: 2 LED-indications
max. conductor diameter: approx. 23 mm
Battery indicator: LED-Indication
Power supply: Battery 1,5 V IEC LR6 (Alkaline)
Overvoltage catergory: CAT II, 600 V
Pollution degree: 2
Hight above MSL: up to 2000 m
Power consumption: approx. 6 mA
Operating temperature: -10° C … 50° C
Storage temperature: -20° C … 60° C
Humidity: below 75 % relative humitity
Dimensions: 183 x 63,6 x 35,6 mm
Weight: approx. 190 g
PTDB93468-05.qxd 14.12.2005 9:41 Uhr Seite 28